Welcome to the Delta Enterprise crib recall web site. Together with the U.S. Consumer Product Safety Commission (CPSC), we have announced two voluntary actions that we are taking related to several of our cribs produced between 1995 and 2007 that use our drop side trigger lock designs. These actions, which do not require consumers to return any of our products, are meant to ensure the safe use, assembly and function of several of our crib models. Please read the following instructions and descriptions carefully to determine if your crib is part of this effort. If you determine that it is please, per the CPSC’s instructions, stop using your crib until you have received and properly installed the replacement parts or retro-fit kit that we will send to you shortly after completing this form.



1. Does your crib have drop side(s) (is there a side that can be lowered and raised?) and if so does it use trigger safety locks per diagram 1 and 2?
Diagram 1   Diagram 2

 

If not, your crib is not affected and you can continue to use it. Make sure to inspect your crib regularly to ensure that all fasteners are tight and that there are no broken parts.


2. If it is a drop side crib with trigger locks, please make sure to have your crib nearby to be able to identify the model number, country of origin and date of manufacture of your crib. This information can be found on the mattress board per diagram 3.

Diagram 3
 



3. Looking at the drop side tracks on your crib (diagram 4) does your crib use safety pegs (diagram 5 and 6) or spring pegs (diagram 7)?

Diagram 4   Diagram 5   Diagram 6   Diagram 7

 
 
 


4. If your crib uses safety pegs (made in Taiwan and Indonesia), please make sure that all of the pegs are in place (for a single drop side crib there should be two pegs, one on each lower track; for a double drop side crib there should be four pegs, one on each lower track).

IF YOU ARE MISSING PEGS PLEASE STOP USING THE CRIB IMMEDIATELY and fill out the following form following form. We will send you, at no cost, replacement pegs immediately along with clear directions for proper installation.

Even if you have safety pegs in place please fill in this form and we will send you a set of new colored pegs to replace your existing pegs. The new color will make it easier for you to ensure that the pegs are always in place.


5. If your crib uses spring pegs and was manufactured in China please stop using your crib immediately and fill out the following form. You will receive at no cost to a retrofit kit and instructions for installing an additional safety mechanism to ensure proper function.



*If you have any additional questions please email us at questions@DeltaEnterprise.com and we will make every effort to respond in the shortest possible time.

Reminder: please remember not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop side crib make sure that the side is in the top locked position every time the child is in the crib. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap and entrap a child. In addition, do not try to repair any side of the crib, especially with tape, wire or rope.


ADDITIONAL PAGES:
CPSC Spring Peg Press Release :   CPSC_SpringPeg_Release.pdf
CPSC Safety Peg Press Release :   CPSC_SafetyPeg_Release.pdf
Full List of Model Numbers and Dates :   Recalled Product List
Company Information :   About Delta Enterprise